DE-CORING HAMMER RVC70

In cooperation with his company sister O.M.LER 2000, O.M.LER Srl designs and manufactures de-coring hammers for foundries to remove sand from aluminium, grey iron engine parts. According to the different castings to de-core, the company developed different hammers models RVC70, RVC70-MBL, RVC70-MBR with different performances.

AIR

One special version for rotating machines is AIR, it has been developed to prevent sand and dirt from reaching inner components of the hammer itself. This special model could be adapted to all hammers versions.

Pression Rate Air consumption
RVC70 4 bar 1070 c/min - 18,4 Hz 840 l/Min
5 bar 1140 c/min - 19,0 Hz 905 l/Min
6 bar 1230 c/min - 20,5 Hz 1040 l/Min
RVC70-MBL 4 bar 1140 c/min - 19 Hz 846 l/Min
5 bar 1230 c/min - 20,5 Hz 932 l/Min
6 bar 1290 c/min - 21,5 Hz 942 l/Min
RVC70-MBR 4 bar 1230 c/min - 20,5 Hz 814 l/Min
5 bar 1380 c/min - 23 Hz 922 l/Min
6 bar 1500 c/min - 25 Hz 928 l/Min
Air inlet coupling Weight of hammer without beater Recommended beating distance (stroke) Max beating distance (stroke)
RVC70 3/4 GAS 24 Kg 70,0 mm 120,0 mm
RVC70-MBL 3/4 GAS 24 Kg 70,0 mm 120,0 mm
RVC70-MBR 3/4 GAS 24 Kg 70,0 mm 120,0 mm
separatore

THOR V3.0

Monitoring System

O.M.LER 2000 offers also a monitoring system to detect the hammers performances (frequency in hertz and beats per minute): Thor V3.0 that connected to the hammers with RB2000 sensors, shows the beating frequency. Each device can monitor till 4 channels.

New design

Touch screen 5.7"

Reduced size

Data logger